Mitsubishi Lancer Evolution IV GSR (CN9A) Build!

Installed Evo 8 Injectos, new climate control and Evo 5 ECU!

2009-11-06T11:53:00.000-08:00

I have been working on the evo for the past 2 days.
I installed the climate control, but couldnt install the ECU yet, as the harness is really stuck! I had installed some new bigger fuel injectors the day before and tried to install the ECU yesterday and failed!

Getting some new parts together

2009-07-02T09:12:00.000-07:00

Bought the following the past days:

Brembo brakes, front and back
Blitz SBC Dual Boost controller
Evo 5 ECU

Ill put some pics up later, too.

F$%K BIG A$$ scratch!

2009-03-27T08:29:00.001-07:00

300Euros to fix.

Mobil 1 5W50

2009-03-27T08:21:00.000-07:00

Bought my oil....
It's something we can buy in Germany. I'd prefer some American Brand oil, but I bought this one.
I bought one 1liter and a 5l canister.
I did find some technical specs on the oil....

And we start again

2009-03-25T02:29:00.000-07:00

So, since I cannot sell the car and a lot of shit happened I am starting this project again.

Parts ordered:

Walbro 255l pump
Cat replacement - cat-delete
Tomei Downpipe
Tomei Elbow

New engine tappets
oil Change to Mobil1 5w50
All new gaskets for exhaust from block to downpipe (the rest is new)

small misc parts

Defi gauges and install stuff

2008-07-29T09:51:00.000-07:00

The Defi gauges arrived last week before I left for a trackday (pics will follow).
I got EGT, Oil temp and boost as well as an a pillar pod and sandwich plate.

Kakimoto Racing exhaust install

2008-07-22T12:45:00.000-07:00

So today, finally I was able to install the Kakimoto exhaust after 2 month waiting for it to arrive.
A little work had to be done, but i'll let the pics do the talking.
Here are before and after videos:

Before

After

As you can see a lot of little crap had to be done to the old bolts on the car and it wasnt easy to install at all.

Getting there: Parts arriving, engine getting done

2008-07-17T05:04:00.000-07:00

The parts above arrived and the engine is done. One part is sadly missing which is still that tensioner, prolly somewhere in the mail.
Engine builder said, it was horrible working on the car. A lot of crap was done to it before.
The exhaust is as thought a Kakimoto, but 2 hangars a missing and one is bent a little and I also need to buy exhaust gaskets for it pretty soon as well.
I am trying to figure out what to do with the ECU, as its not just a simple plug and play, but will prolly have the water system run on its own sensor without the ECU, as thats the major difference in the 2.

I will post all pics as soon as i can, but ive been travelling around a bit.

Evo X vs. WRX STi on Top Gear

2008-07-11T10:32:00.001-07:00

Engine parts arriving

2008-07-11T05:13:00.001-07:00

Today the major parts arrived at the mechanic, they were suppose to get there monday haha.
The tensioner i ordered yesterday from Austria and should get there monday then. I called to italy, UK, germany netherlands to try and find a tensioner in stock and got lucky with a rallye team out of Austria.

Ordered the parts for the engine

2008-07-09T06:31:00.000-07:00

As stated before I had ordered lots to get the engine back to spec, but sadly one part is not in stock. the Alternator Tensioner and this is troublesome, because its one of the more expensive and important parts. I have been looking around if I can find it somewhere else, but had no luck as of yet. This is the part I am missing.

random pics

2008-07-08T14:42:00.001-07:00

Here are some random pics from 2 weekends ago. Clayed down and polished the car and everything :D

Replacement Parts

2008-07-08T11:42:00.000-07:00

My Tech called me today and told me I should replace a lot of parts, so here is the list....
I cancelled my order for some Tein Monoflex due to this.

Power Steering/Alternator/Aircon Belt
Cambelt - EVO 4Upper Cambelt Idler Wheel
Balance shaft belt tensioner
Balance shaft belt
Cambelt Tensioner
Alternator Tensioner / Pulley Assembly
Crank Pulley
Crank Oil Seal - Cambelt Side

Evo 7 ECU and update

2008-07-07T02:47:00.000-07:00

Today I should receive the sandwich plate for the oil adapter for the Defi gauges, which i should receive this week as well.
I also bought an Evo 7 ECU to go with the ECUFlash later in the summer. As seen before I already have Evo 8 Injectors.
Bought the ECU from a Dutch Rallye Team for a good price.

The car should be done tomorrow so I can go pick it up.

I also found a place to ship my Kakimoto. It's been over 2 months since I bought it, but I think the seller wanted to sell it to someone else for a better price, but im not gonna give in and found someone to help me ship it for cheaper.

To compare the size

2008-07-02T11:49:00.001-07:00

This is me standing in front of the evo. As you can see the car is rather small.

Car is registered and brought to Evo specialist

2008-07-02T10:51:00.000-07:00

Yesterday I did get my mail for the license plate and went right to make it. Afterwards I went to an insurance office and got my insurance dealt with.
This morning then I went off to one of the dutch evo builders to get the car inspected, etc.

Still waiting on letter

2008-07-01T03:06:00.000-07:00

I am still waiting for a letter for the my plates. Without those I cannot get any plates and in return cannot apply for any insurance at this point.
I am really hoping to get it later today or early tomorrow morning! I called the RDW earlier today and they said it would get here soon. Let's hope it does.

On another note I got a new computer. I received an Apple macbook. It's very handy due to its size and weight and hope I can use it decently for editing pics and videos down the road.!

Almost 2 months now and not done

2008-06-26T12:41:00.000-07:00

Well almost 2 months and the car is still not 100% road ready.
I am ending the budgets 13k Euros very soon and am still missing necessary parts.
Furthermore I am disappointed in the UK. I have ordered several parts, including Defi gauges, which were in stock, but once I paid were not in stock anymore.
To add to that I had bought a Kakimoto Exhaust almost a month back and it still hasn't been sent.
I am also still missing my evo 6 ECU. One more thing is missing, the Bosch Fuel Pump I bought a few weeks ago.
From what Ive ordered so far I've only received the injectors and a decat.

This is very much a learning experience and not easy by ANY means. I needed to spend more time with car issues than with my exams.

Pics under the car

2008-06-24T09:17:00.001-07:00

Just took some quick pics when the car was on the lift!

Car is done and registered / installed tie rod ends

2008-06-24T09:13:00.000-07:00

Yes, finally the car has been registered.
I installed the tie rod ends today and went back to the RDW and paid the BPM and was done with everything!

Castrol 10w60

2008-06-23T04:06:00.000-07:00

Next is the oil. I'm gonna install the new tie-rods tomorrow and also get an oil change done at the same time.
I bought some Castrol 10w60, although I would have preferred something else, this should do!

More stuff arrived: MLR, decat, model

2008-06-22T13:03:00.000-07:00

As you can see a few extra things arrived.

A decat and the stuff from the Mitsubishi Lancer Register (membercard, keychain, stickers, etc.)

Got my first parts: Injectors

2008-06-20T12:40:00.000-07:00

Since the Evo 4 has 510cc injectors I got my hands on some low milage Evo 8 injectors. They only ran 20,000 km

Today I went to try and register the car

2008-06-19T10:27:00.000-07:00

Since I live in the Netherlands I have to register it here.

here are couple of pointers for people trying to do the same:

Cars before 1997, do not need rear fog lights!
If the car is RHD you have to change the front headlights

You get your car checked out at the RDW www.rdw.nl and they just check the papers and if you want they do the APK (same as MOT, TUV or emissions testing)

I did that and sadly I failed!

I need some new tie rod ends and ordered 2 from www.camskill.co.uk Very nice people and they called me to tell me they shipped it out the same day. good stuff.

Now I have to wait for that.

Because they said the tie rod ends were badI m gonna post some pics.

also wanted to check the cambelt and did so.

here is a pic of the tie rod. It doesn't look bad and the steering actually has no play, but what can you do!

Ordered new ones, they are suppose to look something like this (on the right)

Modding will start soon

2008-06-12T08:36:00.000-07:00

I won a few parts on Ebay for the car and bought some stuff from friends:
I bought the stuff from ebay Germany and UK, its worth checking out different countries ebay's if you are looking for seldom stuff.!

Evo 6 ECU
Evo 8 Injectors
Kakimoto Exhaust
a ebay-decat

I hope to get this stuff soon.

The SweEvo

2008-06-12T08:32:00.001-07:00

10.05.2008 I picked up the Evo about 20 miles of London. The previous owner was a woman and had owned it for about 3 years.
It is/was in fairly good condition for a 12 year old car.
It was a 7 hour drive home with it, back to the mainland of Europe.

First post

2008-06-12T08:31:00.001-07:00

I actually wanted to design a blog for my new car, but I thought I can add other things as well!